The Singer lace foot code 550621 is designed to make it easier to sew lace, ribbons, and trims onto fabrics, ensuring perfect alignment and a professional result. Ideal for creative works, elegant garments, and decorative sewing projects. Compatible with various Singer sewing machines.
THE LACE FOOT MAKES SEWING AND CUTTING LACE AND DELICATE TRIMS ON FABRIC EASIER WITHOUT DAMAGING THE TOP.
THUS THE ADJUSTABLE GUIDE ON THE FOOT MAKES SEWING ACCURATE AND THE LACE REMAINS FLAT.
PREPARATION OF THE OVERLOCK
Needle: Right needle
Stitch type: Three-thread overlock
Stitch length: 2-4
Differential feed: Normal
Upper cutting board: Engaged
1. Engage the lace foot
2. Place the fabric under the foot, right side up, so that the desired amount is cut away
3. Place the lace, right side down, on top of the guide, so that the top of the lace rests against it.
4. The position of the guide can be adjusted with the screw on the foot.
(Loosen the screw, adjust the guide to the desired position, then tighten the screw.)
This lace foot can also be used to attach ribbons to fabric.
1. Disengage the knife.
2. Set the overlocker to a narrow flatlock stitch.
3. Align the ribbon along the guide so that the other ribbons are centered on the ribbon.
4. Sew.
NOTE: IF IT IS NOT NECESSARY TO TRIM THE FABRIC, PLACE BOTH THE FABRIC AND THE LACE ON THE GUIDE. DISENGAGE THE KNIFE. ADJUST THE GUIDE AND SEW.
Italiano
Français
Deutsch
Español
