The Pfaff 2 mm rolled hem foot is designed to create neat and professional rolled hems on lightweight fabrics such as voile, chiffon, organza, or silk. It rolls and stitches the fabric in one step, delivering a clean and durable edge. Perfect for elegant garments, curtains, or fine sewing projects. Also compatible with Singer C240.
A hem is a durable finish that prevents fraying. With the hemmer foot, you can hem lightweight and medium-weight fabrics for clothing and home improvement projects without having to iron the folded fabric before sewing.
How to Use
1. Select the straight stitch and engage the IDT (if available on your sewing machine). If necessary, iron only the beginning of the hem to a width of 2, 3, or 4 mm, depending on the size of your presser foot. Place the fabric flat in the groove under the presser foot and sew a few stitches. Lower the needle into the fabric to hold it in place. Now raise the presser foot and pass the raw edge of the fabric through the loop of the presser foot. Lower the presser foot and continue sewing, holding the raised raw edge of the fabric in front of the presser foot.
2. The fabric should not slide under the right half of the presser foot.
3. Tips: Use a straight stitch on gathered fabrics. On soft fabrics, use a zigzag stitch that just covers the hem measurement (if the fabric curves sharply, this foot cannot be used).
Stitch: Straight stitch or zigzag Stitch length: 2.5 Tension: 3 – 5
Italiano
Français
Deutsch
Español
